Use case P79 · Human
Have Claude Code find out why your computer is slow
- Gadgets, smart home and home lab
- Intermediate
- Claude Code
- Source checked · X post
The short version
What they did
Mattias Geniar’s gaming PC felt slower than it should. He let Claude Code look through the machine. It found slow drives that needed a firmware update, memory running below its rated speed, and the wrong cable to his monitor.
Result (as claimed)
“Let Claude go to town on my gaming PC, and it fixed:
- 100MB/s SSDs are now ~3,500 MB/s
- SSD firmware upgrade, no longer stalls ~4s
- XMP on, RAM went from 2133 MHz (default) to 3200 MHz
- Wrong HDMI cable, switching to DisplayPort, resolution from 3440×1440 -> 5120×2160”
“That SSD issue would probably have been a “Damn, broken already, will buy new one""
Prompt
My [computer model or parts list] feels slower than it should. It runs [operating system], and I notice the slowdown when [describe what happens]. Use Claude Code on this computer to investigate.
1. Check the hardware, drive speed and firmware, memory speed and display resolution without changing settings. Ask me to identify the monitor cable if you cannot read it.
2. Compare what you find with the parts’ documented capabilities and mark anything you cannot verify.
3. Rank possible causes in a short table with evidence, likely impact and the next check.Explain each finding in plain words. Do not call a suspected cause confirmed without a measurement. Before any setting, driver or firmware change, explain the plan and how to undo it, then wait for my approval.
Do it yourself
These steps are my suggested way in, not Mattias’s setup.
What you need
- Claude Code (or another AI coding agent) on the slow computer.
- The make and model of the computer, or the parts list if you built it.
- A backup of anything important before you change firmware or BIOS settings.
Start simple
- Open Claude Code and paste the prompt above.
- Read its list. Ask what each finding means in plain words.
- Fix the easy ones first: a cable, a startup program, a setting in the operating system.
Take it further
- Let it walk you through firmware updates from the maker’s own site, one at a time.
- Ask whether a memory setting like XMP (or EXPO) is off, and how to turn it on in the BIOS.
- Run the same check on an older laptop before you replace it.
Check your work
- Have it measure before and after each change, so you can see what actually helped.
- Only take firmware and drivers from the maker’s site.
- Change one thing at a time. If the computer won’t start, undo the last change.
Source checked. The link, author, date and quote were confirmed against the source. The result itself has not been reproduced. Prompt adapted for this library, inspired by the case. Business size: Individual. Results are quoted as the source claimed them and never improved. Spot an error or a broken link? Email charlie@cbarmorecpa.com.