Use case P2 · Human
Hobbyist has Claude pick the parts, design the circuit, write the firmware and model a 3D-printed case for a dictation microphone
- Electronics and 3D printing
- Advanced
- Claude
- Source checked · X post
The short version
What they did
Over a weekend, Robert Bye built a microphone for dictation and voice mode, with Claude doing the design work from component choice through firmware and a printable enclosure.
Result (as claimed)
“Finished my weekend tinkering making a microphone for dictation and voice mode! / What’s super cool is Claude / - Picked the components / - Designed the circuit / - Made the firmware / - Created the breadboard diagram / - Did the 3D design / - Optimised for 3D printing”
Prompt
I want to build a desk microphone for dictation and voice mode on my [computer and operating system]. My budget is [amount], and I have [tools and experience]. Help me design the electronics, software and a printable case.
1. Suggest components with their documentation and explain what each does. Wait for me to confirm the parts.
2. Provide a circuit and breadboard diagram, then write firmware and a test showing the microphone captures sound.
3. After it works, design a 3D-printable enclosure using [measured board and microphone dimensions].Give me short instructions and an expected result at each stage. Check wiring and voltage against the parts’ documents; flag anything uncertain. Don’t guess physical dimensions. Have me unplug USB power before changing wires and test each stage before continuing.
Do it yourself
These steps are my suggested way in, not Robert’s setup.
Level: Advanced. You choose parts, wire a circuit, flash firmware and print a case.
What you need
- A chat assistant such as Claude, or a coding agent like Claude Code for the firmware.
- A microcontroller board with USB, a digital microphone module, a breadboard and wires.
- The free Arduino IDE or PlatformIO, and a 3D printer or print service for the case.
Start simple
- Paste the prompt above with your budget and the tools you have.
- Ask it to explain each part and why, then check each part’s page before you buy.
- Build on a breadboard first. Ask for a test that shows the mic is picking up sound.
- Flash the firmware and check that your computer sees it as a USB microphone.
- Try dictation. Fix one problem at a time.
Take it further
- Ask for a case design with exact measurements of your board and mic.
- Add a push-to-talk button or a status light.
- Move from breadboard to a soldered board once it works.
Check your work
- Compare the AI’s wiring with the pin diagram in each part’s datasheet before you power it on.
- Measure the real board before printing the case. Print a quick test fit first.
- Stick to USB power. Unplug before you change wiring, and keep mains power out of the project.
Source checked. The link, author, date and quote were confirmed against the source. The result itself has not been reproduced. Prompt adapted for this library, inspired by the case. Business size: Individual. Results are quoted as the source claimed them and never improved. Spot an error or a broken link? Email charlie@cbarmorecpa.com.